Power battery PACK automatic production line (AGV) 01 The lower cabinet is automatically online  02 Install the box connector 03 Reserved work space 04 Modules are automatically put into the box 05 Module pre-tightening 06 The module is automatically tightened 07 Install the collection harness 08 Install BDU 09 Soft connection fixed 10 Install the high-voltage wiring harness 11 BMS installation 12 reserved workstations 13 Connect the water cooling pipes 14 Water-cooled air tightness test 15 EOL test 16 DCR Test 1 17 DCR Test 2 18 Paste the sealing strip 19 Automatic upper cover installation 20 Pre-tighten the upper cover 21 The upper cover is automatically tightened 22 reserved workstations 23 The battery pack is offline.

Module disassembly machine Features Features Used in the module repair process, before the welding of the bar (the side seam welding process of the module has been completed) or after the bar is completely disassembled, the round blade is used for rolling and cutting, and one end of the side plate is cut off, which is convenient for personnel to disassemble the outer frame of the module and take out the cell in the module safely.

Module disassembly machine Features Features Used in the module repair process, before the welding of the bar (the side seam welding process of the module has been completed) or after the bar is completely disassembled, the round blade is used for rolling and cutting, and one end of the side plate is cut off, which is convenient for personnel to disassemble the outer frame of the module and take out the cell in the module safely.

PACK & Module Freezers Features It has the function of cooling and constant temperature of multiple battery packs at the same time The constant temperature and constant temperature can be set, and the average cooling time of the empty box of the low temperature box from room temperature to -35 ℃ is less than 4 hours. The low temperature box is from 25°C to -25°C, the cooling rate is ≧0.7°C/min, and it can maintain continuous operation within the minimum temperature range of ≧72h There is temperature monitoring in the low temperature box, which is located in the 4 corners of the box space, and the real-time temperature inside the box is displayed on the panel outside the box The low temperature box will automatically alarm and stop running when the temperature change exceeds ±2.5 °C when the temperature is constant.

PACK dismantling machine Features Cut the PACK frame and take out the module Quickly replace the hook, suitable for different products, compatible with lower box hoisting and PACK package hoisting Small tooling quality and easy operation.

Automatic PACK point positioning station of lower box body Features Maintain the stability of gas composition in the test area Ensure the stability of the testing process The residual hydrogen and nitrogen component after detection are pump out of that detection area. The direction of exhaust pipeline of the unit can be planned and configured according to the actual situation of plant LAYOUT.