Fully Automatic Resistance Measuring Machine Equipment Introduction： Fully automatic resistance measuring machine is used for resistance screening and coding of chip ceramic resistors. The resistors are transported to the resistance measuring mechanism through the hopper loading mechanism. After the resistance is measured, the resistors are coded and then graded. The resistors are placed in different resistor boxes according to different resistance levels. PARAMETER FORM Equipment name Fully automatic resistance measuring machine Equipment size 2660mmW×1330mmD×1720mmH (without warning light) Equipment weight 3550KG Work efficiency 900-1000 pie/hour Single station Measurable range 20.0-999.0Ω Equipment failure <0.3% Warranty period 1year Additional services Professional technical training MACHINE SHOW

This equipment is used to realize the collaborative robot to clamp the palladium sheet and place it on the module tooling. Its structure mainly includes the collaborative robot, palladium sheet clamping mechanism, palladium sheet feeding mechanism, palladium sheet buffer mechanism, and CCD re-inspection system. CCD vision captures feature points and finds the placement position of the palladium sheet. After the palladium sheet is placed, it will be re-inspected by CCD vision to determine whether the placement of the palladium sheet is qualified to ensure the reliability of the next station. Product Parameters： Equipment name Fully Automatic Palladium Sheet Automatic Loading Machine Pressure 0.5-0.8MPa (72.5-116.0 PSI) Equipment size Designed according to customer requirements Equipment weight 2-5t Installation location： dust-free workshop, equipment noise index ≤75dB, copper, nickel and zinc prohibited Working cycle： 12ea-25s  26ea-45s Positioning accuracy： dust-free workshop, equipment noise index ≤75dB, copper, nickel and zinc prohibited Product compatibility： Length: 50mm-90mm and above Width: 30mm-50mmm and above Height: 5-10mm Equipment failure <0.3% Warranty period 1year Additional services Professional technical training Machine Show:

This conveyor line is used to transport battery aluminum shells, connecting the dust-free workshop and the spraying workshop. The length of the line spans about 7.5m, and the middle transplanting section is ≥1.8m from the ground. Ensure that the incoming materials are not damaged or contaminated. Product Parameters： Equipment name Battery aluminum shell conveyor line Pressure 0.5-0.8MPa(72.5-116.0 PSI) Equipment size Designed according to customer requirements Equipment weight 2-5t Capacity 40PPm Equipment failure <0.3% Warranty period 1year Additional services Professional technical training Machine Show:

The equipment detects leakage from the positive and negative electrodes of the battery by spraying chemical reagents (phenolphthalein).

This equipment is used for drilling holes in main beam welded parts.

Equipment for: Automotive electronics/components, LED/LCD/PDP display lighting, new energy/electronic components/electrical appliances, plastics/rubber/films, scientific research/quality control/institutions/medical equipment, PCB/FPC/HDI/MPCB/IC, etc. Equipment size: Customizable Equipment parameter: Total irradiance: Full spectrum 280～3000nm band; 1120 W/m2±10% W/m2 Temperature range in the box: The light will not turn on when the temperature is between 10℃ and 30℃ Heating and cooling rate: 1℃/min Black label temperature range: 40℃～100℃ adjustable (light cycle); 25～85℃ (dark cycle) Temperature fluctuation: ±0.5℃ Temperature deviation: ±2℃ Humidity range: 0%～60%RH(When the light is on)； 30%～98%RH(When it's dark) Humidity fluctuation: ±3%RH Humidity deviation: ≤5%RH Equipment show:

Equipment for: Automotive electronics/components, LED/LCD/PDP display lighting, new energy/electronic components/electrical appliances, plastics/rubber/films, scientific research/quality control/institutions/medical equipment, PCB/FPC/HDI/MPCB/IC, etc. Equipment parameter: Temperature range： RT～50℃；customizable Temperature stability： ±0.5℃ Distribution uniformity： ≤ 2℃ Temperature deviation： ≤±2℃ Salt spray deposition: 1~3ml/80cm².h Spray method: Continuous/periodic optional (1s~999h adjustable) Equipment show:

Equipment for:  Automotive electronics/components, LED/LCD/PDP display lighting, new energy/electronic components/electrical appliances, plastics/rubber/films, scientific research/quality control/institutions/medical equipment, PCB/FPC/HDI/MPCB/IC, etc. Equipment parameter: Temperature range： -70℃～150℃ Humidity range： 20-98%R.H Heating and cooling rate: 5℃/min 10℃/min 15℃/min 20℃/min Temperature uniformity: ≤2℃ Temperature deviation： ≤±2℃ Humidity deviation： ≤±3%R.H Temperature fluctuation： ≤±0.5℃ Reference standard: GB/T2423 GB/T5170 GB/T11158 GB/T10589 GB/T10592/GB/T10586 IEC60068-3-5 Equipment show:

Equipment for: Automotive electronics/components, LED/LCD/PDP display lighting, new energy/electronic components/electrical appliances, plastics/rubber/films, scientific research/quality control/institutions/medical equipment, PCB/FPC/HDI/MPCB/IC, etc. Equipment parameter: (customizable) Temperature range： -65℃～150℃ Temperature stability： ±0.5℃ Distribution uniformity： ≤4℃ Temperature deviation： ≤±2℃ Defrost cycle: ≥25 cycles Conversion time of high and low temperature switch: ≤15s Recovery time: ＜5 min During high and low temperature switching，overshoot temperature≤3℃ Equipment show: