3D Printer-SDP-300 3D Metal Printer

The processing size of the SDP-120P intelligent metal 3D forming equipment is 120 * 120 * 100mm, using a 200W fiber laser, equipped with a dynamic focusing, high-precision laser galvanometer scanning system, with an intuitive user interface, open and standardized intelligent software, and improved filtering system. It can provide multiple production process optimization paths, with outstanding advantages, and can meet customer needs faster, more flexible, and more cost-effective.

The processing size of the SDP-120E intelligent metal 3D forming equipment is 120 * 120 * 100mm. It is a customized equipment designed by Sinuowei Automation to promote additive manufacturing in the education industry, in combination with the needs of the education industry. This device has an efficient and original powder supply and cleaning design, combined with a complete set of independently developed intelligent data processing software. Users can adjust the device parameters independently and flexibly choose metal materials. This equipment has a high degree of specialization and cost-effectiveness, and is suitable for various needs in the education industry.

The processing size of the SDP-120T intelligent metal 3D forming equipment is 120 * 120 * 80mm, which is an industrialized metal 3D printing equipment customized for customers in the denture industry by Sinuowei Automation in deep combination with the core needs of the denture industry. This equipment has high production capacity, high degree of specialization, high cost-effectiveness, and stable system. The processing process can be unmanned throughout the entire process, and fully automatic monitoring and recording of processing parameters. At present, this device is widely praised by the industry for its high efficiency, convenience, excellent service, and cost savings.

The equipment is used for automatic assembly of clamps and buckles, automatic loading of clamps, detection of tension, installation of buckles and visual inspection, and automatic differentiation between good and defective products. Product Parameters： Equipment name Pre-Opened Spring Band Clamp with Handy Clip Pressure 0.5-0.7MPa (72.5-101.5 PSI) Equipment size 3150×1550×1800mm L W H Equipment weight 1.5t Work efficiency 1000 pie/hour Equipment specifications 24-40 Equipment failure <0.3% Warranty period 1year Additional services Professional technical training Machine Show：

V9 CNC Electrostatic Powder Spray Gun V9 Performance Introduction Full numerical control programmable electrostatic powder spray gun, and single gun on the remote control Powder amount size for manual and automatic gun control. On the one hand, the controller has three standard pre-stored programs On the one hand, the controller has three standard programs pre-stored, which are specifically designed for spraying flat workpieces, complex workpieces and re-sprayed workpieces. On the other hand, the user can precisely control the voltage, spray current, powder output and total air volume at the touch of a button. Up to 20 programs can be stored. How to Use Please connect the ground wire first before turning on the power supply. Wait 5 seconds before pressing the power on button after the 220V power is turned on for the first time, and wait 10 seconds for the 110V power. After the host starts, if you press the key, the passive interface will display the set value of each data, and the actual value will be displayed after 3 seconds, and the system will save all the current data. Input Key Function No.    Function 1 Add or subtract powder 2 Nebulization plus or minus 3 electrostatic additions and subtractions 4 cleansing gas plus or minus 5 Program selection plus or minus 6 New Workpiece Coating Patterns 7 Notched Position Spray Patterns 8 Coating mode for repetitive sprayed parts 9 Program switching key (manual and switching between three modes) 10 Secondary menu switching key (setting cleaning gas) 11 Static switch key 12 work instruction 13 power-on indication 14 power indicator 15 Powe key 16 Fluidization control 17 Fluidizing Pressure Indicator Back Interface Function No. Function 1 220VAC power cord 2 Single Gun Control Line Interface 3 Mainframe Ground 4 Air input 2. φ8 connector 5 Powder pump powder quantity interface φ8 6 Powder pump atomization interface 6 7 Electrode needle cleaning gas port φ4 8 Powder drum fluidization interface φ6 9 Air Input 1. Quick Connector 10 φ8 gas pipe connection "4" and "11" 11 φ8 connector PARAMATER FORM Electronic controller systems Built-in electrostatic spray gun Pneumatic control systems Input voltage: 220V/110V Input voltage: 12V Solenoid voltage: 24VDC Input frequency: 50HZ Input frequency: 35KHZ Input air pressure: 5.5-8bar Input power: 46W Input current: ≤0.6A Compressed air moisture: ≤ma*1.3/NM3 Output voltage: 12VDC Output voltage: -100KVDC Compressed air oil content: ≤ma*0.01g/NM3 Output current: 0.1A-1A Output current: 0-100UA Air flow: ma*19g/NM₃ Valve control voltage: 24VDC Connection cable: 5M Input cable: 2.5M List of configurations for a single set of powder guns: 1. a host  2. a single gun 3. a set of flat nozzle, venturi 4. environmentally friendly silicone powder tube  5. high-flow powder pump a 6. connection PU tube 7. a stainless steel powder barrel 8. a set of electrode holder 9. a set of large, medium and small nozzle 10. a mobile cart 11. a ground line 12. a set of extension rod

Basic material truck Features This material handling truck is mainly used for the unloading, transfer and cold-pressing of the coating machine in the Cell factory. It meets the requirements of the existing coating process for unloading and cold-pressing process. The load capacity can reach 1800kg, and the incoming material can be turned at 180°.