3D Printer-SDP-300 3D Metal Printer

The processing size of the SDP-120P intelligent metal 3D forming equipment is 120 * 120 * 100mm, using a 200W fiber laser, equipped with a dynamic focusing, high-precision laser galvanometer scanning system, with an intuitive user interface, open and standardized intelligent software, and improved filtering system. It can provide multiple production process optimization paths, with outstanding advantages, and can meet customer needs faster, more flexible, and more cost-effective.

The processing size of the SDP-120E intelligent metal 3D forming equipment is 120 * 120 * 100mm. It is a customized equipment designed by Sinuowei Automation to promote additive manufacturing in the education industry, in combination with the needs of the education industry. This device has an efficient and original powder supply and cleaning design, combined with a complete set of independently developed intelligent data processing software. Users can adjust the device parameters independently and flexibly choose metal materials. This equipment has a high degree of specialization and cost-effectiveness, and is suitable for various needs in the education industry.

The processing size of the SDP-120T intelligent metal 3D forming equipment is 120 * 120 * 80mm, which is an industrialized metal 3D printing equipment customized for customers in the denture industry by Sinuowei Automation in deep combination with the core needs of the denture industry. This equipment has high production capacity, high degree of specialization, high cost-effectiveness, and stable system. The processing process can be unmanned throughout the entire process, and fully automatic monitoring and recording of processing parameters. At present, this device is widely praised by the industry for its high efficiency, convenience, excellent service, and cost savings.

MC-16 Powder Friction Spray Gun Friction type spraying method is to use the powder through the friction tube at high speed so that the powder is charged due to friction, this type of coating equipment is composed of a powder storage barrel, powder pump control host. This type of coating equipment is composed of powder storage barrel, powder pump control host and spray gun. This type of coating equipment is composed of powder storage barrel, powder pump control host and spray gun, this type of equipment is charged by friction of powder itself, so it does not need power supply and electrostatic generator to produce high voltage or forced powder. This type of equipment does not need power supply and electrostatic generator to produce high voltage or force the powder to be charged, so there is no electrode, and the spray gun is not connected with the workpiece. There is no electrode, and no strong electrostatic field is generated between the spray gun and the workpiece when the coating operation is carried out, and this kind of independent small electrostatic field is very weak. This small electrostatic field strength is very weak, can only be called a weak electric field, and each paint particles are positively charged. Advantages of the friction-generated spraying method: Faraday effect Powder easily enters into deep recesses of the workpiece, and there is no possibility of automation of dead corners and over-thickness of edges. Powder easily penetrates into deep holes, corners, and narrow grooves, enabling unmanned powder coating that does not require manual repair. Uniformity of coating No Laddie effect, no repulsive phenomenon, and ultra-thick coating can be done up to 400 microns in a single spraying. For some powders, film thicknesses of 30 microns or less can be achieved, and multiple choices of nozzles are available. Orange Peel Weak high-pressure, uniform powder cloud, uniform multi-finger spraying width, the same powder with the traditional electrostatic spraying method will produce orange peel, but not with the friction-generated electricity coating method.               Electrostatic field Each charged powder foam generates a weak electric field, through the air pointing to blow and stick the powder foam to the designated point, the film thickness of the inside and outside of the concave and corners is consistent, and it can save the powder foam by 20-40%. Multi-layer coating Since there is no anti-repulsion phenomenon, it is possible to do multi-layer coating without pinholes or craters under the requirement of heavy corrosion protection. Various applications The automatic spray gun is used with various spray nozzles to apply to various coating jobs with different requirements. Foam output Friction-generated electric spraying method has a smaller amount of foam output than the traditional high-pressure electric spraying method. Although the amount of foam output is smaller, the coating efficiency is higher, the output is unaffected, the load on the recovery system can be greatly reduced, and the energy consumption and maintenance costs are low. Advantages of friction electrostatic guns: Low friction, low running cost New charging method tube wall internal pressure and temperature is small, tube wall friction is less, parts replacement is also cheap, the user has the ability to replace their own. Atomization accelerated air In the body of the gun to increase an assist in atomizing and accelerating the powder foam, so that it excites the powder foam to release positively charged electrons, and depending on the need to send the charged powder to be coated at different places. Interchangeability Most of the parts are interchangeable with the old automatic electrostatic friction gun to increase its economy. Operability Spray gun design, simple operation, no need for advanced skills, general technical personnel to learn easy.

Product Introduction: High-speed parallel robots adopt advanced parallel configuration design and are equipped with high-precision machine vision systems, which can meet the needs of efficient and accurate industrial processes. Delta robots are ideal for high-speed production in food and medicine industry. Widely used in assembly, handling and pick-and-place of heavy materials. Parameter Form: Type S2PM-1100-P15 Axes 3+1 Payload 15kg Manipulator Weight 113kg Diameter 1100mm Repeatability Position 0.05mm Rotation 0.025° Maximum exercise frequency 450pp/min Rotation range ±360° Allowable maximum moment of inertia 0.224kg·m2 Angle range of actuated arm Up 23.5° Down 70° Power supply 3ph 380VAC -10%～+10%，49-61HZ Power capacity 10KVA Rated Power 6.2kw Storage temperature -10℃～70℃ Work environment -10℃～50℃，RH≤80% Protection IP55

The mini American hose clamp machine can automatically assemble hose clamps through straight lines and turntables. Screws, connecting strips, clamps, hoses and other parts are all assembled by machine rolling, locking and forming. Double stations ensure higher productivity.