American Self-Closing Hinge Assembly Machine

E6 Electrostatic Powder Spray Gun Performance Introduction High-voltage static electricity automatic tracking to meet any working condition. Built-in Internal module of built-in electrostatic spray gun generates and releases directly, the high voltage electric field is mainly concentrated between the gun needle and the workpiece, charging the powder repeatedly at a high frequency to improve the powder loading rate. Total energy AFC control, according to the distance between the gun needle and the workpiece, so that it is maintained in the most ideal state to release the electrostatic energy, and automatic spray gun common, reduce replacement costs. Input Key Function No. Function 1 Powder Adjustment 2 Atomization Adjustment 3 Clean Electrode Needle Adjustment 4 Powder Pressure Gauge 5 Atomizing Air Pressure Gauge 6 Clean Electrode Air Pressure Gauge 7 Static Display 8 Static regulator 9 Power Key Back Interface Function No. Function 1 220VAC power cable 2 Mainframe Ground 3 Single Gun Control Line Interface 4 Powder pump powder quantity interface φ8 5 Powder pump atomization port φ6 6 Electrode needle cleaning gas port φ4 7 Air input 2.φ8 connector PARAMETER FORM Electronic controller systems Built-in electrostatic spray gun Pneumatic control systems Input voltage: 220VAC Input voltage: 12V Solenoid voltage: 24VDC Input frequency: 50HZ Input frequency: 20KHZ Input air pressure: 5.5-8bar Input power: 36W Input current: ≤0.7A Compressed air moisture: ≤ma*1.3/NM3 Output voltage: 12VDC Output Voltage: -85KVDC Compressed air oil content: ≤ma*0.01g/NM3 Output current: 0.1A-0.7A Output current: 0-100UA Air flow: ma*19g/NM3 Valve control voltage: 24VDC Connection cable: 4.5M Input cable: 2.5M List of configurations for a single set of powder guns 1. a host 2. a single gun 3. a set of flat nozzle, venturi 4. environmentally friendly silicone powder tube 5. high-flow powder pump a 6. connection PU tube 7. a stainless steel powder barrel 8. a set of electrode holder 9. a set of large, medium and small nozzle 10. a mobile cart 11. a ground line 12. a set of extension rod

The processing size of the SDP-120T intelligent metal 3D forming equipment is 120 * 120 * 80mm, which is an industrialized metal 3D printing equipment customized for customers in the denture industry by Sinuowei Automation in deep combination with the core needs of the denture industry. This equipment has high production capacity, high degree of specialization, high cost-effectiveness, and stable system. The processing process can be unmanned throughout the entire process, and fully automatic monitoring and recording of processing parameters. At present, this device is widely praised by the industry for its high efficiency, convenience, excellent service, and cost savings.

The German-style hose clamp assembly machine can automatically assemble hose clamps through straight lines and turntables. Screws, connecting strips, clamps, hoses and other parts are all assembled by machine rolling, locking and forming. Double stations ensure higher productivity.

Hose clamp making machine is by far the highest in the manufacture of different types and size of hose clamp degree of automation in the world machine . Our machines are non-standard customized products, which have the advantages of standardized production, lowest defect rate, higher final product quality and lower labor costs.

Power battery PACK automatic test Features The overall accuracy of the PACK packet is not high People away from the test station The overall assembly flexibility is strong.

Water cooling & whole package air tightness testing Features Sealing inspection of cell top cover after welding The equipment meets manual loading and unloading, manual Scan code, pump air, inject helium, detection, test data and system correlation and automatic sorting of bad products.